PRODUCTS

Delivering Performance and Compliance
Delivering Performance and Compliance
PVC Resin SG5

k value:68-66

Impurity particle number/piece ≤:16

Apparent density (g/m1) ≤:0.48

Plasticizer absorption per 100g of resin ≤:19

Spread the love

 PVC Resin SG5

Product Introduction

Polyvinyl Chloride Resin is a white powder thermoplastic polymer. As a fundamental and widely used synthetic resin, it possesses excellent plasticity, chemical stability, and electrical insulation. This product features high purity (e.g., up to 99.9% for specific grades) and is an industrial-grade general-purpose resin. Its most notable characteristics are good fluidity and high apparent density. This makes it particularly suitable for producing large-section pipes (like UPVC pipes), effectively improving extrusion production efficiency and ensuring uniform product quality.

Delivering Performance and Compliance

Product COA/MSDS

To ensure customer production safety and product compliance, we provide complete quality documentation for each batch:

  • Certificate of Analysis (COA): Each product batch comes with a dedicated COA. Customers can query or request it using the batch number (Lot/Batch Number) on the product label. This certificate details the actual measured physical and chemical parameters for that specific batch, serving as the core document for verifying specification compliance.

  • Material Safety Data Sheet (MSDS): A complete MSDS is provided, detailing the product’s chemical composition, physical & chemical properties, health hazard information, safe handling instructions, spill procedures, and fire-fighting measures Special attention is required as PVC resin may decompose and release irritating gases above 200°C. Therefore, it must be kept away from heat sources and stored in well-ventilated areas during processing and storage.

Youtube Link:https://youtu.be/tKWYijE8wYk?si=R2JGNrP0nswhkSBr

Product Storage & Packaging

  • Packaging Specification: Standard industrial packaging is used, consisting of kraft paper bags or polypropylene woven bags with an inner plastic lining to ensure moisture-proof sealing.

  • Storage & Transportation: The product should be stored in a dry, well-ventilated warehouse, protected from direct sunlight and moisture. During stacking, it is recommended not to exceed the specified height (e.g., 7 layers) to prevent packaging damage. Covered transportation vehicles must be used during shipping to protect the product from sun and rain.

background